CSG-7410

General Information:

• Production Dates: 2018-Current
• MSRP: $1,099.99 (Suggested retail price. Subject to change without notice.)
• Model Number Breakdown: "CSG" Cut-Off Saw Governed , "7410" The first two numbers are the engine cc size generally within, plus or minus 1 cc to 2 cc. The last two numbers are the sub-version within that model series 
• Replaced Model: N/A
• Replaced By Model: N/A
• Uses & Applications: Designed for a wide variety of concrete and masonry projects for applications such as driveways, patios, pool decks, walkways, firepits, fireplaces grills, patio walls, retaining walls 
• Box Dimensions: Length: 30 in. Width: 12 in. Height: 17 in. Weight: 33 lb.  
• Operator's/Safety Manuals, Parts Catalogs: In Business Portal, go to the "Search" tab and enter the model number in the “Item #” field. From there, select the correct document. 

Features:

• 73.5 cc professional-grade, 2-stroke engine for outstanding performance and durability
• Decompression valve for easier starter pulling effort
• Purge bulb provides fresh fuel to the carburetor
• Reversible cutting head can be moved to enable cutting near a wall or close to the ground
• Brass water valve controls flow of water
• Abrasive wheel included for general cutting, diamond wheel sold separately
• Four-stage air filtration system protects engine from harmful dust ingestion
• Momentary stop switch automatically returns to "on" position 
• Side-access belt tensioner for easy belt adjustment 

Technical Specifications: For more details on specifications, torque limits, service limits, and special tools, refer to the attached "Service Data."

• Length without cutting wheel: 24.4 in. 
• Width without cutting wheel: 9.4 in. 
• Height without cutting wheel: 16.0 in.
• Weight without cutting wheel: 23.6 lb.
• Engine Type: Air cooled, two-stroke, single cylinder gasoline engine
• Engine Displacement: 73.5 cc
• Bore: 2.01 in. 
• Stroke: 1.42 in.
• Compression Ratio: 6.9:1
  
• Ignition Type: CDI (Capacitor discharge ignition)
• Spark Plug: NGK BPMR-7A
  
• Starter: Automatic rewind starter
• Fuel Tank Capacity: 23.67 fl. oz. 
• Oil Tank Capacity: 
• Exhaust: Spark arrestor muffler 
• Clutch: Centrifugal 
• Arbor: 14 in.
• Idle Speed: 2,600-3,000 RPM
• Wide Open Throttle Speed: 9,350-9,750 RPM
• Compression Pressure: 114-172 PSI
• Primary Coil Resistance: N/A (This model does not have a primary coil resistance because it uses a special spark advance system. Therefore, no primary resistance readings are available for this unit.) 
• Secondary Coil Resistance: 1.5-2.5 ohms
• Belt: 6PJ-808
• Pulley Ratio: 2.57:1
• Belt Tensioner: Coil spring system
• Wheel Length: 14 in. 
• Wheel Width: 32 in.
• Wheel Height: 32 in. 
• Maximum Cut-Off Wheel Speed: 3,820 RPM
• Flange Outside Diameter: 100 mm
• Wheel Fastener Tightening Torque: 25-30 Nm
• Maximum Spindle Speed Rating: 3,820 RPM